The modern PP-250 baler is one of our best developments in the field of baling equipment. The volume of the bale chamber of this model with dimensions of 1700x700x800 mm offers new advantages for efficient and convenient loading. This baler is designed for processing both non-ferrous and ferrous scrap metal up to 5 mm thick.
Thanks to these characteristics, the equipment is perfect for both small dynamic enterprises and large industrial companies.
Suitable for obtaining a license for the collection of ferrous scrap.
|Chamber size||1700х700х800 mm|
|Bale size||700x300 mm|
|Baling time||125 sec.|
|For detailed information on technical parameters, please contact the sales department|
The press is adapted to any skill level of workers
Includes solution of issues related to installation, commissioning, personnel training, warranty and post-warranty service. Organization of prompt delivery of inexpensive original spare parts, availability of a full range in warehouses
based on chrome-plated sleeves and rods of the Italian plant Stelmi. They have a collapsible design and are available for service
The contacting surfaces are lined with armored plates made of high-strength steel analogue HARDOX adapted for any kind of scrap
The equipment has a solid welded structure using high-quality thick-walled metal
Thanks to the use of reliable Italian hydraulics of the new generation, smooth switching of valves and distributors in the system is achieved, thereby reducing wear of parts to a minimum
The presses are equipped with reliable Czech pumps that work even in extreme temperature conditions
Installed on the front side of the bale chamber, it cuts off the protruding parts of the overall scrap.Увеличивает производительность на 21% за счет меньшего количества операций крышки.
Eliminates the human factor, namely:
The manipulator-baler kit solves the main obstacle to achieving high baler performance – chamber loading time
With the manual method, this parameter takes 70% of the cycle time, approximately 5-7 minutes. With the manipulator configuration, this parameter is reduced to 30% and increases the productivity of the baler by 2 times! In addition to speed, instead of 3 workers involved in the scrap collection with the baler, only 1 worker is required: the same person is the operator of the baler and the operator of the manipulator.
This is the same as putting a second baler next to it. A baler with this configuration unleashes its full potential and gives its owner a tangible understanding of the benefits and speed of the work, seen with his own eyes.Increase in productivity by almost 2 times. Instead of 3 workers, only 1 operator is now required
A system that evenly starts the engine and pumps. Extends the life of the equipment.Extends the life of the station up to 12 years.
Prevent "chewing" of the metal in the bale chamber and skewing of the pressure plate with uneven distribution of scrap in the chamber. Recommended for processing small scrap.Increase the service life of the bale chamber by 300% in comparison with the usual one.
Having the most popular spare parts at hand is a guarantee of uninterrupted collection of scrap. Be provided with knives, bushings, cuffs in advance. A serviced baler will last longer, which means it will bring income longer. All components are easy to install and do not require any special skills. Our support units will advise you on how to service the baler or provide service work themselves.Full set of consumable materials for 3 years of work
Additionally cools the hydraulic oil in the hydraulic system. Recommended for areas with hot climates.Increases the service life of lip seals and prevents them from deformation and leakage due to overheated oil.
The hopper will enable the operator and the worker not to stop the metal loading operations during the baler cycle. This speeds up and allows them to use the baler more efficiently than without a hopper.
This solution is recommended for enterprises with small-sized scrap, where no cropping with a lid is required. The hopper is operated by an additional lever/button by the operator. The hopper can withstand falling metal loads.It increases productivity and makes it possible to load scrap during the cycle